Magnavox Blu MBP5320F User Manual

TR
O
U
B
L
ES
H
OO
TIN
G  
W
I
R
E
D
S
ET
U
P  
3
I
N
I
T
I
A
L
S
E
T
U
P  
2
SETUP MANUAL  
Problem  
Tip  
HDMI  
Turn On the BD using its  
Remote Conttrol. Please  
No power.  
• Check the AC power cord, if it is properly connected.  
• Unplug the AC power cord, and wait for about 5-10  
seconds. Plug it back in and attempt to Power On the unit.  
locate the Source / Input /  
AUX /Video button onTV’s  
remote control. The button  
may vary on theTV brand and  
model. Once you have located  
the button, press until you see  
“PleaseWait...” or the Initial  
Setup Menu on theTV Screen.  
Please Wait...  
Network Settings  
Please wait a moment. Please press [RETURN] to  
stop this operation.  
AV/SOURCE  
No sound or picture. • Make sure both theTV and Blu-ray Disc™ player are  
Turned On.  
State : Setting...  
Power Button  
• Confirm the connections to theTV are made properly  
as shown in CONNECTIONS.  
Network Setup  
• Check to see whether the connectedTV or another  
device supports HDCP. (This unit will not output a  
video signal unless the other device supports HDCP.)  
Initialization  
Language  
6 / 7  
Please select your language for on-screen  
Welcome!  
display.  
It may take a few minutes.  
This unit is ready for initialization. Please  
follow the on-screen instructions.  
English  
Español  
Français  
Network Settings  
MBP5320F  
No reaction to the  
Remote Control.  
• Confirm that the player’s AC power cord is plugged into  
a power outlet.  
• Check the Batteries in the Remote Control, and make  
sure they are inserted properly by + or - symbols.  
• Point the Digital or Cell Phone Camera towards the  
front of the Remote Control. Press any Arrow key on  
the Remote Control and look at the Camera Display.  
If a pulsating light appears on the Display the Remote  
Control is sending out an IR signal.  
Network Selection  
Please wait a moment. Please press [RETURN] to  
stop this operation.  
Next  
State : Connecting...  
Please select the connection method.  
Cancel  
Return  
Wired  
See the Online Owner’s Manual for details:  
Wireless  
Select your language.  
Return  
Cancel  
6 / 7  
1 / 7  
It may take a few minutes.  
Quick Start Mode  
Automatically check for latest software  
Step 1 Please visit website www.MAGNAVOX.com  
Step 2 Select Download.  
Step 3 Type in the Model # “MBP5320F” and click “Search”.  
Step 4 Select the Manual, and click on “Download”.  
Network Settings  
Would you like to activate the Quick Start Mode?  
The unit will start up more quickly, but will consume  
more power in standby mode.  
Would you like to activate the software update  
DNote  
feature? When connected to the Internet,  
the unit will automatically check for the latest  
software.  
Some Cameras have an IR Filter and will not display  
the IR signal.  
Home Network  
Internet  
:
:
Pass  
Pass  
On  
Off  
On  
Off  
Network Settings  
Network connection succeeds.  
No high-definition  
video signal on the  
TV screen.  
• Does the Disc contain high-definitionVideo and theTV  
support it? High-definitionVideo is only available when  
the Disc contains it and theTV supports it.  
Return  
Return  
Select whether to set the IP address and other  
settings automatically or manually.  
MAGNAVOX is a registered trademark of Philips North America Corporation  
and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under  
license from Philips North America.  
End  
Auto  
7 / 7  
Manual  
Distorted picture.  
• Sometimes a small amount of picture distortion may  
appear. This is not a malfunction.  
Return  
Cancel  
Click on  
Network Selection  
No sound or  
distorted sound.  
• Adjust the volume.  
• Check the HDMI and AUDIO connections as necessary.  
• Make sure the HDMI cable is not plugged into an HDMI-  
DVI adapter which does not handle Digital sound.  
• Check the settings in “Audio Out” menu.  
If you select “Wired”,  
please go to in step  
4 / 7  
Please select the connection method.  
.
.
3
Wired  
Wireless  
If you select “Wireless”,  
please go to in step  
Return  
Cancel  
© 2013 Funai Electric Co., Ltd.  
Printed in China  
4
1 / 7  
Cannot play back a  
disc.  
• Make sure that the product supports the disc.  
• Check the region code of the disc. This unit supports  
the following region codes.  
ECD0AUH  
2VMN00063  
Network Setup  
★★★★★  
*
2
V
M
N
0
0
0
6
3
*
-
Blu-ray Disc™: “A”  
-
DVD: “ALL” or “1”  
• Clean the disc.  
C
O
N
N
E
C
TI
O
N
S  
W
I
R
E
L
E
S
S
S
E
T
U
P  
1
4
Cannot connect to  
the network.  
• Check to see if the modem / router has Power turned  
On.  
• Confirm, if the Internet light is showing activity (light  
blinking) on the modem / router.  
• Check network settings on the unit. Please refer to  
Online Owner’s Manual.  
• Power cycle the modem’s and/or router’s AC plug from  
its AC outlet for 30 seconds, and then plug it back in.  
Then, try reconnecting cords. If you have a telephone /  
Internet modem with your cable service, then you may  
have to use its reset button or remove the backup  
battery to reset this type of modem. Now wait for the  
lights to show activity and try reconnecting.  
Connection to aTV  
Access Point Setting  
Access Point Setting  
Please input the WEP/WPA key with software keyboard.  
Network Selection  
Auto  
Scan  
Please select the access point.  
Please select the setting mode.  
Wireless Access Point A  
Wireless Access Point B  
Wireless Access Point C  
Wireless Access Point D  
Wireless Access Point E  
Wireless Access Point F  
Auto Scan  
Manual  
Easy Connect (WPS)  
Retry  
Return  
Cancel  
Return  
Cancel  
AC plug  
Done  
Return  
Clear  
Network Setup  
3 / 7  
3 / 7  
2 / 7  
Enter the security key to your  
wireless router. Key content is case-sensitive.  
Network Selection  
Access Point Setting  
Network Settings  
• Check the cable connections to the router.  
• If none of above solves trouble, please contact your ISP  
(Internet Service Provider) for further assistance.  
Select whether to set the IP address and other  
settings automatically or manually.  
Please confirm the setting.  
Please select the connection method.  
From here on, the headers will show  
“Access Point Setting” when using  
“Easy Connect (WPS)” setup.  
It may take a few moments.  
SSID  
:
:
:
Wireless Access Point A  
WPA-PSK (AES)  
Wired  
Auto  
LAN  
HDMI OUT  
Wireless  
Security  
Manual  
Next  
Retry  
Cannot use the  
wireless connection.  
• Once you have activated the wireless connection, please  
wait 30 seconds for the connection to be established  
afterTurning On the unit, before trying to access  
network features such as BD-Live™, DLNA home  
network server and the third-party network services.  
Return  
Cancel  
WEP/WPA Key  
xxxxxxxxxxxx
xxxxxxxxxx  
Return  
Cancel  
HDMI cable  
(not supplied)  
Return  
Cancel  
Network Settings  
1 / 7  
4 / 7  
3 / 7  
Home Network  
Internet  
:
:
Pass  
Pass  
If your router has a PBC*  
Easy  
Connect  
• If  
appears in the upper left corner of the Home  
Network Settings  
Access Point Setting  
Push Button Method  
(
)
Push Button Configuration  
Network connection succeeds.  
Wired andWireless Connections  
Menu screen, this unit is connected to an Access Point.  
Please contact your ISP for further assistance when you  
cannot access BD-Live™ or network services.  
(
)
WPS  
button, you can use  
Please select the setting mode.  
End  
Please push the PBC (push button configuration) on the wireless router  
and select ‘Push Button Method’ button on screen.  
“Push Button Method”  
which is the easiest way to  
Wireless  
Auto Scan  
Wireless Connection  
7 / 7  
Manual  
broadband router  
PIN Code Method  
Easy Connect (WPS)  
Please select ‘PIN Code Method’ button on screen.  
If “Home Network” passed,  
but “Internet” failed, please  
contact your Internet service  
provider for troubleshooting assistance.  
set up a wireless connection.  
If your router does not have it,  
please use the “Auto Scan” setup.  
Return  
Cancel  
Return  
Cancel  
If you do not find a solution above, please visit our website  
for the Online Owner’s Manual  
2 / 7  
2 / 7  
Please download it and then refer to “TROUBLESHOOTING” section  
for more information. If additional support is required, please contact  
our Customer Service at 1-800-605-8610.  
Active Internet connection is required to your  
[
]
Please push the PBC button on your Wireless Router, then quickly click OK on “Push Button Method”.  
If setup fails using “Easy Connect (WPS)”,  
please select “Auto Scan” or “Manual” mode.  
*
PBC button may be called WPS  
button on your wireless router.  
modem or broadband router. If there is trouble  
connecting to the Internet, refer to the relevant  
topics inTROUBLESHOOTING.  
Internet  
or  
When the unit has successfully been connected to an access point,  
D
Note  
• If you are experiencing signal  
issues with your wireless  
connection, please confirm that  
your wireless router is placed  
close enough to the unit.  
SE
R
VI
C
I
NG  
appears in the upper left corner of the Home Menu screen.  
Wired Connection  
• If this unit becomes inoperative, do not try to correct the problem  
by yourself. There are no user-serviceable parts inside. Eject the  
disc (if possible), disconnect the USB Memory Stick (if connected),  
place the unit into Standby mode, unplug the Power plug, and then  
* This icon does not necessarily mean that this unit is connected to the Internet.  
Modem or  
Router  
LAN  
HDMI OUT  
Wireless network setting is completed.  
You are ready to enjoy network features over WiFi!  
LAN cable (not supplied)  
Network Setup  
please visit:  
or contact: 1-800-605-8610  
ECD0AUH_MBP5320F_SU.indd 1  
2013/06/20 13:27:48  

Philips AQ6401 User Manual
Panasonic WVCF20 User Manual
Panasonic NV S5EC User Manual
Optoma Technology HD65 User Manual
MTX Audio MTX Thunder TA91002 User Manual
Miller Electric Digital Elitet User Manual
Krups B95 User Manual
Kenwood KVT 747DVD User Manual
Kambrook Blender KSB8 User Manual
Kaidan KiWi+ User Manual